Konica BizHub

/in /by

Adding the Konica BizHub printer to your Windows 10 workstation

  1. Click the Windows logo on the lower-left corner of your screen
    Then type add a printer
    Click Add a printer or scanner

    ‏‏‎ ‎
  2. Click on Add a printer or scanner

    ‏‏‎ ‎
  3. Wait 10 seconds…
    Click The printer that I want isn’t listed once it appears

    ‏‏‎ ‎
  4. Select Add a printer using a TCP/IP address or hostname

    ‏‏‎ ‎
  5. Leave Device type as is: Autodetect
    For Hostname or IP address: , type 192.168.11.31
    Leave the Port name to whatever the system named it.
    ‏‏‎ ‎
  6. Select Use the driver that is currently installed (recommended)
    ‏‏‎ ‎
  7. Set Printer name to Konica BizHub‏‏‎ ‎
  8. Make sure Do not share this printer is selected
    Then click Next
    ‏‏‎ ‎
  9. Leave Set as the default printer checked

    Click Finish
    STAY ON THIS PAGE AS WE WILL NOW ADD THE OCÉ PLOTTER

 

Océ PlotWave 450

 

 

  1. Click on Add a printer or scanner
    ‏‏‎ ‎
  2. Wait 10 seconds…
    Click The printer that I want isn’t listed once it appears
    ‏‏‎ ‎
  3. Select Add a printer using a TCP/IP address or hostname
    ‏‏‎ ‎
  4. Leave Device type as is: Autodetect
    For Hostname or IP address: , type 192.168.11.30
    Leave the Port name to whatever the system named it.‏‏‎ ‎
  5. Click Next
    Select Oce on the left
    Select Oce PlotWave 450 on the right
    Click Next
    ‏‏‎ ‎
    ‏‏‎ ‎
  6. Select Use the driver that is currently installed (recommended)

    ‏‏‎ ‎
  7. Click Next

    ‏‏‎ ‎
  8. Make sure Do not share this printer is selected
    Then click Next

    ‏‏‎ ‎
  9. Uncheck Set the default printer
    Then click Finish